Seven techniques, first move to hardest

River Loop strategy: how to solve loop puzzles without guessing

River Loop asks for one river through every open square. Every board has one answer, and you can reach it without a single guess. The trick is knowing what to look for next. This guide covers every move our solver uses, in the order you'll need them, each on a real board.

The rules, in short:

  • Draw one river through every open square, once each.
  • It moves between squares that share a side, and it can't pass a thick wall or enter a blocked square.
  • It never branches or crosses itself, and it closes into one loop.

So every open square has exactly two river ends: one way in and one way out. Almost every technique below comes back to that. The same rules power Inkwell Games' Loopy River, so the moves work there too. New to the game? The Loopy River guide has the rules with practice boards.

Every board here is a real 6×6 position, stopped just before our solver used the move. Blue is river drawn already, a grey × is a side the river can't use, yellow squares are the ones the move looks at, and orange is the move itself.

Moves you see from one square

These three solve every Easy and Medium board on their own.

1. Use the last two ways out

A square needs two river ends. If it has only two sides the river can still use, the river uses both. Corners are the first place to look: a corner square has just two neighbours, so its whole bend is settled before you've drawn anything.

The top-left corner has two ways out, so the river uses both.

Walls and blocked squares make more of these. A square beside a wall or a blocked square loses a side, and a square boxed in on two sides is a corner in all but name. Later in a solve, crosses do the same job: every side you cross off might leave a neighbour with only two ways out.

2. Close off a full square

Once a square has its two river ends, it's finished. The river can't touch it again, so cross off every other side it has. That sounds too simple to matter, but it is the move that feeds all the others: each cross takes a way out from a neighbour.

Row 1, column 2 has river on both sides. Its last side, below, gets crossed.

3. Never close the loop early

The answer is one loop. So if two squares are the two ends of the same stretch of river, the river can't join them unless that finishes the loop through every square. Our hints put it this way: "Joining the two ends of this stretch would close the loop. That loop would miss other squares."

The stretch in the bottom-left corner has both ends side by side. Joining them makes a loop of four squares, so that side is crossed.

Look for this whenever a stretch bends back on itself. Its two ends are easy to lose track of when the stretch is long, so follow it with your eye from one end to the other.

Techniques for Hard boards

When the one-square moves run dry, these look at a few squares at once.

4. Spot a junction

Take a square with no river yet and three sides left. If two of those sides lead to the two ends of the same stretch, the river can't use both: that would close the loop early. It needs two of its three sides, so it must use the third one.

Row 2, column 2 can go up, left or down. Up and left are both ends of one stretch, so one of its river ends goes down.

Junctions hide in plain sight, because nothing on the square itself looks forced. Train yourself to check the squares that sit between the two ends of a stretch.

5. Every area needs two ways in

The river has to go into every part of the board and come back out. So any group of squares needs at least two sides the river can cross to reach it. If an area is down to exactly two ways in, the river uses both.

The yellow block has only two ways in: below column 3 and below column 6. The river needs both. The first is drawn here.

Walls make this move. Whenever a run of walls nearly cuts the board in two, count the gaps. Two gaps means two river crossings. One gap would be a broken board, so if a move you're about to make leaves an area with one way in, the move is wrong.

6. Count the crossings

Because the river is a loop, it crosses the edge of any area an even number of times: every exit has a matching way back in. When an area has just one undecided side on its edge, count the river crossings already there. An odd count means the last side is river. An even count means it's crossed.

Four river crossings already cut the edge of the yellow block. Four is even, so its last open side is crossed.

The area can be any shape: everything you can reach from one side without crossing a decided edge. Small areas are the easiest to count, so start near the walls where the board is already boxed in.

For Expert boards

Expert boards need this a few times. It is still logic, not guessing.

7. Look a few moves ahead

Pick an undecided side and ask: what if the river went here? Follow the moves that would be forced, using the first three techniques. If a square ends up with no way through, a loop closes early or an area gets cut off, the side can't be river. Our boards never need more than three forced moves to get there, and crossing off a full square's spare sides doesn't count, so the test always fits in your head.

What if the river ran down from row 1, column 2? The forced moves leave row 2, column 4 (red) with one way out.
So that side is crossed.

Here is the test, one move at a time:

  1. River runs down from row 1, column 2. That square is now full, so its right side is crossed.
  2. Row 2, column 2 is full too, which crosses its left side.
  3. Row 1, column 3 has lost its left side, so it has two ways out left: right and down. The river uses both.
  4. That fills row 1, column 4 and row 2, column 3, so their spare sides are crossed.
  5. Row 2, column 4 now has a wall on its right and crosses above and to its left. One way out is not enough.

Start tests where the chain will be short: at the end of a stretch of river, or at a square with three ways out or fewer. If a test runs out of forced moves without breaking anything, it proves nothing. Rub it out and try another side.

Habits that save time

  • Corners and walls first. They give you the first bends for free.
  • Cross as you go. Every time a square gets its second river end, cross its other sides straight away. Those crosses are what make the next move.
  • Follow each new piece of river. Look at the square it reaches before you look anywhere else.
  • Know where your stretches end. The two ends of each stretch are where early loops and junctions come from.
  • Count gaps in walls. A region with two ways in hands you two pieces of river.
  • Never guess. A wrong guess has to be found and undone, which costs far more than a moment's thought.
  • Use Hint to learn. Hint shows the next move and names the reason. If it keeps showing the same kind of move, that's the one to practise.

Where to practise

Every board here is free, with no app and no account:

Put a technique to work now

Four new boards today, all solvable without a guess.

River Loop strategy FAQ

What is the best strategy for River Loop?

Work from the quick moves to the slow ones. First use every square with only two ways out, close off every square that already has its two river ends, and never join the two ends of a stretch unless that finishes the whole loop. When those run dry, look for junctions, areas with only two ways in, and areas whose crossings you can count. Only on Expert boards should you need to test a side in your head.

How do you solve Loopy River puzzles?

River Loop uses the same rules as Loopy River from Inkwell Games: one loop through every open square, never through a wall or a blocked square. So every technique in this guide works there too. Start in the corners and beside walls, where squares have only two ways out, then follow the river from square to square. TryHard Puzzles is not affiliated with Inkwell Games, and our boards are our own.

Do you ever have to guess in River Loop?

No. Every board has exactly one loop, and our solver checks that logic alone reaches it before a board is published. Even the hardest step, testing a side, is not a guess: you follow a few forced moves in your head and only draw what the test proves.

Why does the river cross an area's edge an even number of times?

Because it is a loop. Every time the river leaves an area it has to come back in to close up, so crossings come in pairs. An area with only one way in can never be visited, and an area whose border already has an odd number of river crossings needs one more.

Which River Loop level should I practise on?

Easy (6×6) and Medium (7×7) need only the first three moves in this guide. Hard (8×8) adds junctions, two ways in and crossing counts. Expert (9×9) adds short what-ifs. Move up a level once you finish the one below without using Hint.

TryHard Puzzles is an independent puzzle site and is not affiliated with, endorsed by, or sponsored by Inkwell Games. Loopy River is their game. River Loop is our own take on this classic loop puzzle, and every board here is an original of our own making.